差分

このページの2つのバージョン間の差分を表示します。

--- cameras88 [2015/01/04 10:43] – created yaasan
+++ cameras88 [2015/01/04 11:36] (現在) – [Place web cam on the visible point of layout. Connect web cam to PC] yaasan
@@ 行 11: / 行 11: @@
 {{http://buin2gou.sakura.ne.jp/sblo_files/powerele/image/TutorialCS88_01-thumbnail2.png}}
+===== Unzip =====
+Unzip downloaded files.
+===== Assemble =====
+Prepare and assemble your track for playing model railway.
+Please assemble your rails. Then you don't need to place the locomotives.
+{{http://buin2gou.sakura.ne.jp/sblo_files/powerele/image/dictionary-thumbnail2.png}}
+===== Connect PC and tracks, DSmain / DCC/MM2 shields etc. =====
+Connect tracks and trackbox, PC. After that, place web cam. Because you are caught in web cam cable.
+===== Place web cam on the visible point of layout. Connect web cam to PC =====
+You need to check the visible point of your layout. Of course, you can select the monitor area which you want to sense the locomotive.
+[[http://buin2gou.sakura.ne.jp/sblo_files/powerele/image/WebCamPosition.jpg|{{http://buin2gou.sakura.ne.jp/sblo_files/powerele/image/WebCamPosition-thumbnail2.jpg}}]]
+===== Prepare DSmain or DCC/MM2 shield (assembled with Arduino). =====
+You have to prepare booster or trackbox. Fore example, DSmain, DCC/MM2 Shield with Arduino, Railuino kits etc.
+===== Run CameraS88. =====
+Run CameraS88. You can see the window.
+{{http://buin2gou.sakura.ne.jp/sblo_files/powerele/image/TutorialCS88_02-thumbnail2.png}}
+===== Check webcam =====
+Click start button of CameraS88. Check the view of web cam.
+If the position is wrong, you need to adjust the position of web cam. After that, please keep the web cam.
+Click register button. Do not place the locomotives on the track. Then Do not place your locomotives. If did, CameraS88 doesn't work correctly.
+{{http://buin2gou.sakura.ne.jp/sblo_files/powerele/image/TutorialCS88_03-thumbnail2.jpg}}
+===== Register S88 areas =====
+Register S88 areas. Drag the image on the window, you can add new sensor areas. When double click the area, you can adjust the position and size. Registering requires a virtual S88 address. Please assign S88 address. Please watch the following instruction video.
+{{http://buin2gou.sakura.ne.jp/sblo_files/powerele/image/CameraS88_config.mp4|480x360}}
+===== Check the area =====
+Please check the registered area. When the background color is like the locomotives, the recognition may not failure. Yellow box means recognized area. Red box means selected area.
+===== Place your locomotives =====
+Keeo CameraS88 software and run Desktop Station. Please click start button and provide power on the track.
+Desktop Station can communicate with CameraS88 automatically. When CameraS88 doesn't run, Desktop Station priors S88 decoder signals.
+===== Check the recognition of locomotives =====
+Please check the recognition of the locomotives. Then, you need to check the S88 sensor status in the event script window on the Desktop station.
+When the locomotive is on the Address 3 area on the CameraS88, the address 3 shows green on the Desktop Station.
+[[http://buin2gou.sakura.ne.jp/sblo_files/powerele/image/TutorialCS88_05.jpg|{{http://buin2gou.sakura.ne.jp/sblo_files/powerele/image/TutorialCS88_05-thumbnail2.jpg}}]]
+When the locomotive is on the Address 1 area on the CameraS88, the address 1 shows green on the Desktop Station.
+[[http://buin2gou.sakura.ne.jp/sblo_files/powerele/image/TutorialCS88_04.jpg|{{http://buin2gou.sakura.ne.jp/sblo_files/powerele/image/TutorialCS88_04-thumbnail2.jpg}}]]
+===== Edit an event script with Desktop Station =====
+You can edit an event script which controls your locomotives and turnouts triggered by S88 sensor.
+Please see the following instruction video.
+{{http://buin2gou.sakura.ne.jp/sblo_files/powerele/image/DS_EditEvents.mp4video.mp4}}
+[[http://buin2gou.sakura.ne.jp/sblo_files/powerele/image/TutorialCS88_06.png|{{http://buin2gou.sakura.ne.jp/sblo_files/powerele/image/TutorialCS88_06-thumbnail2.png}}]]
+===== Example scripts =====
+Sensor 1 (STATION-1)：
+DESKTOPSTATION,SCRIPT,2013
+SPEED,0,64,0
+WAIT,2,,0
+SPEED,0,64,0
+WAIT,2,,0
+DIRECTION,0,2,0
+WAIT,20,,0
+SPEED,0,128,0
+Sensor 2 (STATION-2)：
+DESKTOPSTATION,SCRIPT,2013
+SPEED,0,128,0
+WAIT,2,,0
+SPEED,0,64,0
+WAIT,2,,0
+ACCESSORY,6,0,0
+DIRECTION,0,1,0
+WAIT,20,,0
+SPEED,0,128,0
+Sensor 3 (STATION-3)：
+DESKTOPSTATION,SCRIPT,2013
+SPEED,0,128,0
+WAIT,2,,0
+SPEED,0,64,0
+ACCESSORY,6,1,0
+WAIT,2,,0
+DIRECTION,0,1,0
+WAIT,20,,0
+SPEED,0,128,0
+{{http://buin2gou.sakura.ne.jp/sblo_files/powerele/image/MVI_7307.mp4video.psp.mp4}}
+{{http://buin2gou.sakura.ne.jp/sblo_files/powerele/image/CameraS88_working.mp4}}
+===== Technical issue about recognition =====
+You can adjust the reaction level of CameraS88's recognition. Use 2 parameters of Threshold box.
+[[http://buin2gou.sakura.ne.jp/sblo_files/powerele/image/TutorialCS88_07.png|{{http://buin2gou.sakura.ne.jp/sblo_files/powerele/image/TutorialCS88_07-thumbnail2.png}}]]
+Matching value:
+This value means the threshold of color difference between registered image and present image. Default value is 32. This value means the threshold of color difference is 12.5%. This value can set 0 to 255. When the value is more bigger than default value, the recognition area will be decreased.
+Block value:
+This value means the recognized border line of the blocks. The block is showed box on the window. You can set it 0 to 255. 128 means that the 50% of the box is reacted.