cameras88

差分

このページの2つのバージョン間の差分を表示します。

この比較画面へのリンク

--- cameras88 [2015/01/04 11:16] – yaasan
+++ cameras88 [2015/01/04 11:36] (現在) – [Place web cam on the visible point of layout. Connect web cam to PC] yaasan
@@ 行 31: / 行 31: @@
 You need to check the visible point of your layout. Of course, you can select the monitor area which you want to sense the locomotive.
-{{http://buin2gou.sakura.ne.jp/sblo_files/powerele/image/WebCamPosition-thumbnail2.jpg}}
+[[http://buin2gou.sakura.ne.jp/sblo_files/powerele/image/WebCamPosition.jpg|{{http://buin2gou.sakura.ne.jp/sblo_files/powerele/image/WebCamPosition-thumbnail2.jpg}}]]
 ===== Prepare DSmain or DCC/MM2 shield (assembled with Arduino). =====
@@ 行 70: / 行 69: @@
 Please check the recognition of the locomotives. Then, you need to check the S88 sensor status in the event script window on the Desktop station.
+When the locomotive is on the Address 3 area on the CameraS88, the address 3 shows green on the Desktop Station.
 [[http://buin2gou.sakura.ne.jp/sblo_files/powerele/image/TutorialCS88_05.jpg|{{http://buin2gou.sakura.ne.jp/sblo_files/powerele/image/TutorialCS88_05-thumbnail2.jpg}}]]
+When the locomotive is on the Address 1 area on the CameraS88, the address 1 shows green on the Desktop Station.
 [[http://buin2gou.sakura.ne.jp/sblo_files/powerele/image/TutorialCS88_04.jpg|{{http://buin2gou.sakura.ne.jp/sblo_files/powerele/image/TutorialCS88_04-thumbnail2.jpg}}]]
+===== Edit an event script with Desktop Station =====
+You can edit an event script which controls your locomotives and turnouts triggered by S88 sensor.
+Please see the following instruction video.
+{{http://buin2gou.sakura.ne.jp/sblo_files/powerele/image/DS_EditEvents.mp4video.mp4}}
+[[http://buin2gou.sakura.ne.jp/sblo_files/powerele/image/TutorialCS88_06.png|{{http://buin2gou.sakura.ne.jp/sblo_files/powerele/image/TutorialCS88_06-thumbnail2.png}}]]
+===== Example scripts =====
+Sensor 1 (STATION-1)：
+DESKTOPSTATION,SCRIPT,2013
+SPEED,0,64,0
+WAIT,2,,0
+SPEED,0,64,0
+WAIT,2,,0
+DIRECTION,0,2,0
+WAIT,20,,0
+SPEED,0,128,0
+Sensor 2 (STATION-2)：
+DESKTOPSTATION,SCRIPT,2013
+SPEED,0,128,0
+WAIT,2,,0
+SPEED,0,64,0
+WAIT,2,,0
+ACCESSORY,6,0,0
+DIRECTION,0,1,0
+WAIT,20,,0
+SPEED,0,128,0
+Sensor 3 (STATION-3)：
+DESKTOPSTATION,SCRIPT,2013
+SPEED,0,128,0
+WAIT,2,,0
+SPEED,0,64,0
+ACCESSORY,6,1,0
+WAIT,2,,0
+DIRECTION,0,1,0
+WAIT,20,,0
+SPEED,0,128,0
+{{http://buin2gou.sakura.ne.jp/sblo_files/powerele/image/MVI_7307.mp4video.psp.mp4}}
+{{http://buin2gou.sakura.ne.jp/sblo_files/powerele/image/CameraS88_working.mp4}}
+===== Technical issue about recognition =====
+You can adjust the reaction level of CameraS88's recognition. Use 2 parameters of Threshold box.
+[[http://buin2gou.sakura.ne.jp/sblo_files/powerele/image/TutorialCS88_07.png|{{http://buin2gou.sakura.ne.jp/sblo_files/powerele/image/TutorialCS88_07-thumbnail2.png}}]]
+Matching value:
+This value means the threshold of color difference between registered image and present image. Default value is 32. This value means the threshold of color difference is 12.5%. This value can set 0 to 255. When the value is more bigger than default value, the recognition area will be decreased.
+Block value:
+This value means the recognized border line of the blocks. The block is showed box on the window. You can set it 0 to 255. 128 means that the 50% of the box is reacted.

cameras88.1420337776.txt.gz · 最終更新: 2015/01/04 11:16 by yaasan