play_station_joystick

差分

このページの2つのバージョン間の差分を表示します。

この比較画面へのリンク

--- play_station_joystick [2015/06/12 06:21] – [Wire assignment] yaasan
+++ play_station_joystick [2015/06/27 09:47] (現在) – [Example soldering and assembling] yaasan
@@ 行 10: / 行 10: @@
 DSmainR4 is using [[http://playground.arduino.cc/Main/PSXLibrary|PSXLibrary]]. Please download and copy it to Arduino IDE's libraries folder.
+===== Supporting joystick =====
+  * Taito's Densha-de-go One handle master controller
 ===== Wire assignment =====
@@ 行 17: / 行 21: @@
 |2.COMMAND | 4.LOAD | 6.LOAD |D4 | |
 |3.N/C (9 Volts unused)| N/C | N/C | N/C| |
-|4.GND | 2.GND | 3.GND, 5.GND | GND | |
+|4.GND | 2.GND | 3.GND,\\ 5.GND | GND | |
-|5.VCC | 6.+5V | 1.+5V | 5V | |
+|5.VCC | 6.+5V | 1.+5V | 5V | Supported 3 to 5V |
 |6.ATT | 1.DATA | 2.DATA | A0 | |
 |7.CLOCK | 5.RESET | 7.RESET | D5 |
 |8.N/C | N/C | N/C | N/C| |
 |9.ACK | N/C | N/C | N/C| |
+If you want to use a standard Ethernet cable, please see [[http://www.incentre.net/tech-support/other-support/ethernet-cable-color-coding-diagram/|this page]] for Ethernet cable pin specification.
+Wiring diagram
 {{:psjoystickif.png}}
+S88 pin assignment
+{{http://www.desktopstation.net/figures/S88_map03_thm.jpg}}
 ===== Soldering instruction =====
@@ 行 36: / 行 47: @@
 {{http://buin2gou.sakura.ne.jp/sblo_files/powerele/image/IMG_8097-thumbnail2.JPG}}
+===== Example soldering and assembling =====
+If you are using Cat.5e Ethernet cable, See [[https://en.wikipedia.org/wiki/Category_5_cable|T568B wiring specification]].
+If Cat.5, See [[https://en.wikipedia.org/wiki/Category_5_cable|T568A wiring specification]].
+The following assembling example is using Cat.5e cable.
+{{:psplugsoldering1.jpg|}}
+{{:psplugsoldering2.jpg|}}
+{{:psplugsoldering3.jpg|}}

play_station_joystick.1434057682.txt.gz · 最終更新: 2015/06/12 06:21 by yaasan