usbmascon
文書の過去の版を表示しています。
目次
How to use your keyboards and USB Train Controller
Desktop Station can receive keyboard and mouse command. Some train joysticks supports keyboard emulation Then, if you have train controller like Densha-de-go mascon or Rail driver etc, you can control your locomotives using Mascon.
Keyboard mapping
| Key | Assigned function | Note |
|---|---|---|
| Escape | Power off | Turn off the track power. |
| F1-F12 | Function 1-12 | These keys are assigned locomotive sounds and the other functions. |
| Page Up or Z or Mouse wheel up | Increment locomotive speed | Adjusting the locomotive speed. |
| Page Down or A or Mouse wheel down | Decrement locomotive speed | Adjusting the locomotive speed. |
| Period | Free locomotive break | Break the locomotive. |
| Comma | Apply locomotive break | Free the locomotive. |
| Home | Change locomotive direction | Toggle locomotive direction. |
How to setup
You need the following devices.
Keyboards and Mouse, emulated devices
You don't need to prepare. Please check relation with keyboard mapping.
Densha-de-go Mascon
* Densha-de-go Controller for play station 1 * PS1 to USB joystick converter as ELECOM JC-PS201U * DGo to BVE beta3 (Freeware)
How to play
- Prepare and place you tracks and locomotives
- Connect a trackbox between PC and tracks. Trackbox means DSmain, DCC/MM2 shield with Arduino, etc.
- Run the joystick software like DG to BVE beta3 etc.
- Configure and click start button
- Run Desktop Station
- Let's play
usbmascon.1421702651.txt.gz · 最終更新: 2015/01/20 06:24 by yaasan